E
El_digi
- Jan 1, 1970
- 0
Hello folk,
I have for sale some AVR programmers - my production.
-----------------------------------------------------------
AVR ISP STKxxx compatible programmer - LPT
http://www.krasen.yoree.org/avr/avr_isp.jpg
This programmer is based on the Atmel AVR ISP parallel port design.
It takes the power supply from the target board. The 10 pin IDE
connector has a Atmel STKxxx compatible layout.
Supported Microcontrollers:
ATtiny11 ATtiny11L ATtiny12 ATtiny12L ATtiny12V ATtiny15L
ATtiny22L AT90S1200-4 AT90S1200-12 AT90S2313-10 AT90S2313-4
AT90S2323 AT90LS2323 AT90S2333 AT90LS2333 AT90S2343 AT90LS2343
AT90S4414-8 AT90S4414-4 AT90S4433 AT90LS4433 AT90LS4434
AT90S4434 AT90S8515-4 AT90S8515-8 AT90C8534 AT90S8535 AT90LS8535
ATmega103 ATmega103L ATmega128 ATmega128L ATmega16 ATmega16L
ATmega161L ATmega161 ATmega163 ATmega163L ATmega323
ATmega323L ATmega64 ATmega64L ATmega8 ATmega8L ATmega8515L
ATmega8515 ATmega8535L ATmega8535
Complete including:
Programmer, 10 pin 40 cm cable, 10 pin IDE connector, CD with
software.
Price $10 USD (EUR 8.00)
-------------------------------------------------------------------
Simple ATMEL AVR AT90xx programmer - LPT
http://www.krasen.yoree.org/avr/avr.jpg
FUNPROG programmer compatible.
Supported Microcontrollers:
AT90S1200 AT90S2313 AT90S2323 AT90S2343 AT90S4414 AT90S4434
AT90S8515 AT90S8535 ATmega103 ATmega128 ATmega161 ATmega163
ATtiny12
The parallel port of PC is used for connection. The programmer uses
supply from the LPT port and does not need external. This is a normal
- no In-System programmer. For some new computers and notebooks if
doesn't work correctly you must use external 5V power.
Complete including:
Programmer, 10 pin 40 cm cable, 4 adapters, CD with software.
Price $15 USD (EUR 10.00)
---------------------------------------------------------------
AVR ISP programmer – USB
http://www.krasen.yoree.org/avr/avr_usb.jpg
Supported Microcontrollers:
AT90S1200 rev. A AT90S1200 rev. B AT90S1200 rev. C AT90S1200
AT90S2313 AT90S2323 AT90S2333 AT90S2343 AT90S4414 AT90S4433
AT90S4434 AT90S8515 AT90S8535 ATtiny12 ATtiny15 ATtiny19
ATtiny28 ATtiny26 ATmega8 ATmega8 BOOT ATmega16 ATmega16 BOOT
ATmega32 ATmega32 BOOT ATmega8515 ATmega8515 BOOT ATmega103
ATmega603 ATmega128 ATmega128 BOOT ATmega161 ATmega161 BOOT
ATmega163 ATmega83 ATmega163 BOOT ATmega83 BOOT ATmega8535??
ATmega8535 BOOT??
Complete including:
Programmer, 10 pin 40 cm cable, USB cable, blank test PCB board, CD
with software.
Price $60 USD (EUR 50.00)
--------------------------------------------------------------
Sorry for errors in description.
All programmers are brand new.
Payment online via Credit card using https://www.ikobo.com or bank
transfer to germany bank account.
Shipping from Bulgaria (Europe) worldwide via Registered Airmail -
$5.00 USD EUR 4.00 ($2.00 additional item)
If you have any queries do not hesitate to e-mail me.
Many thanks for taking the time to read this post.
Regards
El_digi
I have for sale some AVR programmers - my production.
-----------------------------------------------------------
AVR ISP STKxxx compatible programmer - LPT
http://www.krasen.yoree.org/avr/avr_isp.jpg
This programmer is based on the Atmel AVR ISP parallel port design.
It takes the power supply from the target board. The 10 pin IDE
connector has a Atmel STKxxx compatible layout.
Supported Microcontrollers:
ATtiny11 ATtiny11L ATtiny12 ATtiny12L ATtiny12V ATtiny15L
ATtiny22L AT90S1200-4 AT90S1200-12 AT90S2313-10 AT90S2313-4
AT90S2323 AT90LS2323 AT90S2333 AT90LS2333 AT90S2343 AT90LS2343
AT90S4414-8 AT90S4414-4 AT90S4433 AT90LS4433 AT90LS4434
AT90S4434 AT90S8515-4 AT90S8515-8 AT90C8534 AT90S8535 AT90LS8535
ATmega103 ATmega103L ATmega128 ATmega128L ATmega16 ATmega16L
ATmega161L ATmega161 ATmega163 ATmega163L ATmega323
ATmega323L ATmega64 ATmega64L ATmega8 ATmega8L ATmega8515L
ATmega8515 ATmega8535L ATmega8535
Complete including:
Programmer, 10 pin 40 cm cable, 10 pin IDE connector, CD with
software.
Price $10 USD (EUR 8.00)
-------------------------------------------------------------------
Simple ATMEL AVR AT90xx programmer - LPT
http://www.krasen.yoree.org/avr/avr.jpg
FUNPROG programmer compatible.
Supported Microcontrollers:
AT90S1200 AT90S2313 AT90S2323 AT90S2343 AT90S4414 AT90S4434
AT90S8515 AT90S8535 ATmega103 ATmega128 ATmega161 ATmega163
ATtiny12
The parallel port of PC is used for connection. The programmer uses
supply from the LPT port and does not need external. This is a normal
- no In-System programmer. For some new computers and notebooks if
doesn't work correctly you must use external 5V power.
Complete including:
Programmer, 10 pin 40 cm cable, 4 adapters, CD with software.
Price $15 USD (EUR 10.00)
---------------------------------------------------------------
AVR ISP programmer – USB
http://www.krasen.yoree.org/avr/avr_usb.jpg
Supported Microcontrollers:
AT90S1200 rev. A AT90S1200 rev. B AT90S1200 rev. C AT90S1200
AT90S2313 AT90S2323 AT90S2333 AT90S2343 AT90S4414 AT90S4433
AT90S4434 AT90S8515 AT90S8535 ATtiny12 ATtiny15 ATtiny19
ATtiny28 ATtiny26 ATmega8 ATmega8 BOOT ATmega16 ATmega16 BOOT
ATmega32 ATmega32 BOOT ATmega8515 ATmega8515 BOOT ATmega103
ATmega603 ATmega128 ATmega128 BOOT ATmega161 ATmega161 BOOT
ATmega163 ATmega83 ATmega163 BOOT ATmega83 BOOT ATmega8535??
ATmega8535 BOOT??
Complete including:
Programmer, 10 pin 40 cm cable, USB cable, blank test PCB board, CD
with software.
Price $60 USD (EUR 50.00)
--------------------------------------------------------------
Sorry for errors in description.
All programmers are brand new.
Payment online via Credit card using https://www.ikobo.com or bank
transfer to germany bank account.
Shipping from Bulgaria (Europe) worldwide via Registered Airmail -
$5.00 USD EUR 4.00 ($2.00 additional item)
If you have any queries do not hesitate to e-mail me.
Many thanks for taking the time to read this post.
Regards
El_digi
