Maker Pro
Maker Pro

Fuse

Status
Not open for further replies.

Yehuda

Sep 18, 2021
5
Joined
Sep 18, 2021
Messages
5
I purchased a DC Audio 175.4, which does not include an onboard fuse. They recommend using a 140 amp fuse, although these can be difficult to come by. I ordered an Absolute brand from Amazon because it was the only place I could find it. Are they a reliable brand? Also, would a 125 amp fuse be sufficient? That and 150 amp are both readily available, however, I'm hesitant to use the latter. In case I add another amp, I'll use 0 gauge wire. Are there any fuse brands you should avoid?

Moderators note : removed commercial link again, banned user for a week, as the user had been warned before.
 
Last edited by a moderator:
Status
Not open for further replies.
Top