Maker Pro
Maker Pro

Gain decrease in the in-band of a common emitter amplifier.

inass bouhichia

Mar 6, 2018
6
Joined
Mar 6, 2018
Messages
6
Hi guys,

I have designed a simple common emitter using the BFU660F as shown in the schematic, in the simulation i had a flat gain from approximatly 3MHz to 100Mhz, However during mesurements, i had a gain difference of 1.5dB between the gain at 3MHz and 100MHz. And i have yet to find an explanation for this and would appreciate any ideas.

Thank you in advanve.
upload_2018-8-2_18-42-9.png
 

Attachments

  • upload_2018-8-2_18-40-49.png
    upload_2018-8-2_18-40-49.png
    105.9 KB · Views: 23

LvW

Apr 12, 2014
604
Joined
Apr 12, 2014
Messages
604
To be honest - I am surprised that the difference is not larger than 1.5 dB.
At frequencies as large as 100 Mhz you have to consider many parasitic effects that are not included in the simulation setup.
 
Top