Maker Pro
Maker Pro

Generac IX1600 portable inverter

Geochurchi

Jul 2, 2021
2
Joined
Jul 2, 2021
Messages
2
Good morning, after finally getting the motor to start and run reasonably well, it went to pick up the load, Overload light comes on even though the load is under the specs, after tearing the unit apart to get to the inverter module terminal connection and performing the suggested test procedure which according to the specs. I should be reading 195 Ohms on the suggested test points when in fact I am seeing 189K, is this module junk?
 

debe

Oct 15, 2011
278
Joined
Oct 15, 2011
Messages
278
Yes its junk, common fault with inverter modules. And it can happen to any brand generator.
 

debe

Oct 15, 2011
278
Joined
Oct 15, 2011
Messages
278
Just un lucky. Return it for another one.
 
Top