Maker Pro
Maker Pro

Generac Smart Management Module Dead

sambeet

Dec 30, 2023
3
Joined
Dec 30, 2023
Messages
3
I got a working latest board. Please see the Green one is mine/bad and Blue one is new/good. So far, in diode mode I tested and compared all the power components. Except D7 everything else are matching. Showed volt 0.46v/1.5v(old) vs 0.46/OL(New). Removed the D7 and tested and found to be good(0.46v/OL). They have different resistor values for R6,7,8,9...Need to see why 1.5v in reversed bias while in the board. What else can be done ?
 

Attachments

  • IMG_4666.jpg
    IMG_4666.jpg
    575.5 KB · Views: 2
  • IMG_4665.jpg
    IMG_4665.jpg
    594.6 KB · Views: 2

Delta Prime

Jul 29, 2020
1,967
Joined
Jul 29, 2020
Messages
1,967
Bingo! Thank you sir.
Welcome to Maker Pro.
I am the last one to be saying anything about "Etiquette" but what I have noticed is that you just can't barge in to someone else's thread.
Perhaps you should start your own thread and reference this thread that way you can kick anybody off of it. That's the part I like. :cool:
 
Top