Maker Pro
Maker Pro

Got loads of pluggable terminal blocks (from wasted equipment) - ideas on how to utilize

Kabelsalat

Jul 5, 2011
182
Joined
Jul 5, 2011
Messages
182
Hi guys.

From work, I have collected a huge box of leftover so called "pluggable Terminals Blocks with Screws". Range from 3 to 10+ terminals per block.

However - the rest of the equipment is trashed, including the other part (PCB mounted) of the blocks.

Now - since the PCB part of the terminal blocks are gone, I'm thinking that it isn't much use for the rest in practice.

However - before I throw this all to recycle - You happen to have any clever ideas on what (if any) the terminal blocks can be used for - as in home/hobby related project ?

This highlights a picture of the terminal block in question (scroll down ~5 pages to view):
 

Kabelsalat

Jul 5, 2011
182
Joined
Jul 5, 2011
Messages
182
No, your image show a type that already have pins for pcb mounting. Let me try to link an image:

l_103-30X.jpg
 
Top