Maker Pro
Maker Pro

Gould Classic 6000

salvatore

Feb 10, 2022
1
Joined
Feb 10, 2022
Messages
1
Hello everyone
I have a defective gould classic 6000 oscilloscope turns on and a black
screen with horizontal stripes appears on the monitor. it would seem
that eprom 27c4001 do not start unfortunately I do not have a programmer
to verify the checksum written on the eprom itself. but i have a friend
who owns the programmer. I would need the bin files to program the eprom
in case the problem were those, if there is someone who can pass them to
me I would be very grateful

Cita testo selezionato Risposta
 
Top