GPIB port for Agilent 8510C Network Analyzer

[awanha]

I want to connect Agilent 8510C Network Analyzer using GPIB-USB controller. Which port of the network analyzer is GPIB port from below which i can provide as an address to GPIB controller?



8510 HP-IB address: 7

System bus address: 21

Source HP-IB address: 19

Test set HP-IB address: 20

Plotter HP-IB address: 5

Printer HP-IB address: 5

 

[Delta Prime]

If you know how to navigate the on-screen menu basic functions then I'm not telling you.You should know already you're using a spectrum analyzer that's too easy.

https://www.keysight.com/us/en/assets/9018-40641/user-manuals/9018-40641.pdf

 

[awanha]

If you know how to navigate the on-screen menu basic functions then I'm not telling you.You should know already you're using a spectrum analyzer that's too easy.

https://www.keysight.com/us/en/assets/9018-40641/user-manuals/9018-40641.pdf

Thanks for your response. I believe its 8510 HP-IB address: 7. Initially i thought its the address of the NW analyzer itself.