N
Nicholas Kinar
- Jan 1, 1970
- 0
Hello--
I am working on a custom electronics system which ultimately requires a
hand-held case design. Consequently, I am wondering if anyone would
know of a good book, paper or tutorial on electronics case design.
How would I align the circuit board inside the case with the outside of
the case? How do I create standoffs for the circuit board? How do I
effectively deal with the routing of wires inside of the case? Perhaps
there are more general books that are available on this type of design.
Does anyone have a suggestion?
As an aside, I am also curious as to how it might be possible to design
an enclosure for an electro-optical system. How would I integrate
lenses and an optical system into the enclosure? Are there standard
mounting parts for lenses which I can model in a CAD program (and then
produce using rapid prototyping), or would I simply purchase
"ready-to-order" mounting parts?
I've posted something similar on the comp.cad.pro-engineer newsgroup,
but for this posting on sci.electronics.design, I've widened the net to
be broader than just using the Pro/Engineer software. I hope that this
posting should be interesting to a broader group of individuals.
Are there any resources out there on this type of design? Perhaps this
is not of interest to those working in electronics (after all, case
design is sometimes more often done by mechanical and industrial
engineers), but perhaps there are some "important"
books/papers/tutorials on how to do this.
Nicholas
I am working on a custom electronics system which ultimately requires a
hand-held case design. Consequently, I am wondering if anyone would
know of a good book, paper or tutorial on electronics case design.
How would I align the circuit board inside the case with the outside of
the case? How do I create standoffs for the circuit board? How do I
effectively deal with the routing of wires inside of the case? Perhaps
there are more general books that are available on this type of design.
Does anyone have a suggestion?
As an aside, I am also curious as to how it might be possible to design
an enclosure for an electro-optical system. How would I integrate
lenses and an optical system into the enclosure? Are there standard
mounting parts for lenses which I can model in a CAD program (and then
produce using rapid prototyping), or would I simply purchase
"ready-to-order" mounting parts?
I've posted something similar on the comp.cad.pro-engineer newsgroup,
but for this posting on sci.electronics.design, I've widened the net to
be broader than just using the Pro/Engineer software. I hope that this
posting should be interesting to a broader group of individuals.
Are there any resources out there on this type of design? Perhaps this
is not of interest to those working in electronics (after all, case
design is sometimes more often done by mechanical and industrial
engineers), but perhaps there are some "important"
books/papers/tutorials on how to do this.
Nicholas