Maker Pro
Maker Pro

hc-sr501 sensitivity

guy_c

Oct 31, 2023
11
Joined
Oct 31, 2023
Messages
11
@∆' - Yes definitively.
Ill study your suggestions this weekend.
Today i tried to attenuat using the parchment (potatoes) baking paper. Sensor became completely blind. Then i reduced total feedback resistance of opamp#2 (jumper from pin13 to the pot) Didn't work but i was .
 

guy_c

Oct 31, 2023
11
Joined
Oct 31, 2023
Messages
11
@Delta Prime - Used to have some cooking skills but since my girlfriend is a Cordon Bleu, i lost it. Anyway, what's so absurd? if rf traverses walls and xrays traveses flesh why shouldn't ir travers parchment? More seriously, i found the bags you've been talking about. Will experiment coming Sun. Also ordered pe sheets of .3 and .5mm from AliExpress but due to war condition, nay not arrive soon.
 

Delta Prime

Jul 29, 2020
1,642
Joined
Jul 29, 2020
Messages
1,642
Anyway, what's so absurd?
Absurd is not a bad word neither is ignorance,it should not have a negative connotation. To use those words in a hurtful way does nothing... but increases the arch of a cat's back! It's like transposing an equation, what you do to one side you have to do to the other to solve for a variable which doesn’t seem
to be in the right place. You're piece of parchment is not in the right place..so to speak.
It’s not as simple as just moving stuff around though. There are rules to get to this point, and those rules and their application are necessary.
You yourself noticed that the parchment blocked the detector entirely so...you will never do that again, we will just move on forward not backward.
I'm still learning how to convey information correctly as best as I can honestly. So we will wait for your purchase to arrive and we will go from there. :)
By the way for a little levity.
You say your girlfriend is a cordon bleu she better watch out...for the CIA.
Culinary institute of America. :D
 
Last edited:
Top