Maker Pro
Maker Pro

Hello, do somebody know ltspice

Status
Not open for further replies.

michael1978

Mar 17, 2012
388
Joined
Mar 17, 2012
Messages
388
hiMm
i haveone question, why i have to whait so long for result transient, transient 100m
about 1 hour a half
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Large circuit?
Slow computer?
Convergence problems?
...

See here for a collection of tips for using LTSPICE.
 

michael1978

Mar 17, 2012
388
Joined
Mar 17, 2012
Messages
388
What were you trying to simulate?
i am trying to simulate, the foster seeley, i dont see normal one hour en half, i learn i read 74 pages for ltspice, i am still gonna red it 75 pages
my computer is windows 10 32 BIT DUAL PROCESSOR DUAL 1.30 BUT I TESTED ITS WORK LIKE 2 MHZ? because is 32g harddisk plue one card memory 32 giga is 64g plus ram 2G
 
Last edited:

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
This thread is o.k. here, it wil not be moved. My link points to our ressources.
Upload your circuit (.asc file) so we may have a look at it?
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
You don't add there unless you have a resource to share. The link I gave was for you to read the information presented in these resources to help solve your issues.
 

davenn

Moderator
Sep 5, 2009
14,254
Joined
Sep 5, 2009
Messages
14,254
and on that good response, it's time to close the thread

@michael1978 it really is time you started to read up and learn the basics of electronics
Start studying what each component does ... resistors, capacitors, diodes etc

read the LTSpice info in the link Harald gave you

You really must start to make a serious personal effort to learn the basics
That way, you wouldn't be asking such basic questions that I see in your threads here and on other forums
It will also make helping you a lot easier when everything doesn't have to be explained to you from square one :)

You have already been banned on at least one other forum. It would be in your best interests not to let the same happen here :)


Dave
 
Last edited:
Status
Not open for further replies.
Top