Maker Pro
Maker Pro

[HELP] Accumulator charger

milansekirica

Nov 9, 2022
3
Joined
Nov 9, 2022
Messages
3
Hello,I need help with my school project.So basically I got the transformer but 2x13,8V and the max current I think is the 32A because i took it out from some old rectifier.I need help because my teacher said that empty accumulator is going to take a lot of electricity(Amp) and I need to somehow lower the electricity inside and I have no idea how. I need to know what power(W) and current(A) is going through the elements if someone knows how to calculate that and I need some advice how to (if its already not because I maybe dont see that) lower the current,with the resistor after the diodes BYS24-90(I took DSA10I100PM schottky 100V 10A 35W because that were only in shop) or somehow else? Should I use 2 thyristors or 2 triacs because in a local shop there is not the same triac and thyristors but similar to the TIC246A.
SCHEME
20221109_163821.jpg
 
Top