Hello! One of my college assignments requires me to design a class A amplifier. I'm having trouble with it.

NOTE: forget about the resistor values. They have nothing to do with the question, they're only there as Multisim required it.

There is supposed to be 1mA through R1, and the voltage across R2 is supposed to be 1/10Vs, which is 0.9V in this instance. The base voltage is supposed to be 0.7V higher than this, so there should be 1.6V at the base. The Hfe can be assumed to be 200.

Can anyone explain how I go about getting all the resistor values?

NOTE: forget about the resistor values. They have nothing to do with the question, they're only there as Multisim required it.

There is supposed to be 1mA through R1, and the voltage across R2 is supposed to be 1/10Vs, which is 0.9V in this instance. The base voltage is supposed to be 0.7V higher than this, so there should be 1.6V at the base. The Hfe can be assumed to be 200.

Can anyone explain how I go about getting all the resistor values?