Maker Pro
Maker Pro

HELP DT9205A MULTIMETER

Jackdu7889

Feb 13, 2015
1
Joined
Feb 13, 2015
Messages
1
Hi guys i have a problem with my multimeter DT9205A in controller after when i open it :(

1-qY9lDz.jpg

2-0nHIbB.jpg

3-zgWH35.jpg

[Edited by moderator to reduce image size -- KrisBlueNZ]
 
Last edited by a moderator:

shrtrnd

Jan 15, 2010
3,876
Joined
Jan 15, 2010
Messages
3,876
Good luck trying to realign those contacts on the switchplate. I never did get the one I took apart back together right.
I suppose you can do it if you have a lot of patience and a lot of time.
What was wrong with the meter that caused you to disassemble it?
If you have a circuit problem instead of a contact problem,it may not be worth the effort.
 
  • Like
Reactions: zam

merzigs44r

Apr 24, 2021
1
Joined
Apr 24, 2021
Messages
1
Hi, I'm Jimmy, I'm a newbie here...
I got a current voltage, amperage, etc reading error except for the continuity test on my multimeter DT-9205 A. As soon as I put the probe to test, it obviously showed me the value of -1....please help me fix my multimeter....thanks a lot
 
Top