Maker Pro
Maker Pro

Help finding a programmer for Macronix microcontroller

gsm_dealer08

Mar 15, 2024
1
Joined
Mar 15, 2024
Messages
1
Hi all. I need some help finding a programmer to flash a Macronix MX10EXA microcontroller. So far the only one i could find under 500 USD was the Xeltek Superpro 610p but I'm put off by the price of the adaptors. I should mention I need this for a hobby project so I don't want to invest more than 500 on the tools required. Any suggestions would be greatly appreciated
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,716
Joined
Nov 17, 2011
Messages
13,716
According to the datasheet figure 4, you can use in system programming using a tool called winisp.
But I have absolutely no experience with this. I just did some Googling.
 
Top