Help ID connector, 3pin, .1", shell, w/pic

[Ben Jackson]

Can someone ID this connector? I've tried every connector manufacturer
I can think of, although some have atrocious websites and I might have
missed it.

It's white, 3 pin (also need the 4 pin version), .1" / 2.54mm spacing,
slight 'D' to key it with slight ridges between pins. The side is
slotted.

http://ad7gd.net/misc/what_connector.jpg

That's a vertical mount, I want right-angle. That one has 'MXT 9'
or possibly 'MXT 8' on the back. The RA one has 'MXT 24'.

 

[Ben Jackson]

Can someone ID this connector?

It's white, 3 pin (also need the 4 pin version), .1" / 2.54mm spacing,

Actually it was 2.50mm spacing (0.98")

http://ad7gd.net/misc/what_connector.jpg

That's a vertical mount, I want right-angle. That one has 'MXT 9'
or possibly 'MXT 8' on the back. The RA one has 'MXT 24'.

And what I thought was the date code, which after peering at enough
of them I figured out was `5268'. It's a Molex Mini-SPOX wire-to-board
header p/n 22-05-7035 and -7045 (for the 3/4 pin RA versions)

http://www.molex.com/catalog/pdf/MX5268-NA.pdf

Of course I figure this out right after finalizing a Mouser order.