Maker Pro
Maker Pro

Help identifying capacitors

NCRat

Jan 31, 2015
2
Joined
Jan 31, 2015
Messages
2
I'm trying to repair an old TV hyperboard and need to replace a bunch of capacitors. I know how to replace them but not how to identify the markings so I get the right replacements. Could someone help me identify the markings on these caps?
Thanks!
 

Attachments

  • Board Caps.PNG
    Board Caps.PNG
    425.5 KB · Views: 153

Arouse1973

Adam
Dec 18, 2013
5,178
Joined
Dec 18, 2013
Messages
5,178
The top figure is the batch number, not important here. The second figure is the value in uF (micro Farad), the bottom figure is the voltage rating. The type is probably general purpose so no special type needed. Watch out for the sizes, some of them will have the same value and voltage rating but be different sizes make sure you measure the old ones. See link for guidance.
Adam
https://www.electronicspoint.com/resources/component-identification.44/
 

NCRat

Jan 31, 2015
2
Joined
Jan 31, 2015
Messages
2
Terrific, thank you! The top number was throwing me off, so this is a huge help!
 
Top