Maker Pro
Maker Pro

help identifying the key to make this board IOT enable.

akeassad

Aug 4, 2020
1
Joined
Aug 4, 2020
Messages
1
Hi,
I have got a control unit from a electroplating machine. now I would like to know how can I control this unit using rs485 instead of manual input to via the buttons. thanks.

PS missing chip is a PSOC1 from cypress.
 

bertus

Moderator
Nov 8, 2019
3,303
Joined
Nov 8, 2019
Messages
3,303
Hello,

You can not link images from your local PC.
Upload the images using the "Upload a File" button.
Keep in mind that the images can have a size of 300 kB.

Bertus
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
Keep in mind that the images can have a size of 300 kB.
I have seen this problem for years on EP.
I was once told 100kB.
Soooo, do we finally have a definitive max size of 300kB?.

Martin
 

bidrohini

Feb 1, 2023
164
Joined
Feb 1, 2023
Messages
164
You can use a microcontroller or a computer to send commands to the PSOC1 chip via RS485. You will need to write software that sends the appropriate commands to the PSOC1 chip to simulate the button presses that you would normally use to control the machine.
 
Top