Maker Pro
Maker Pro

Help identifying this device and tips to hook it back up

Cyanescen

Jul 14, 2015
1
Joined
Jul 14, 2015
Messages
1
So I found this item in a rummage sale and I'm a little lost as to what to do to possibly get it up and working. So I know enough to recognize that it's a power supply, but as to what, I am not sure. I could use a better bench power supply, but as to if that's what this is, or if it's for something entirely different I don't know and it really has very very little markings on it to help guide me besides those on the transformer. Any help is appreciated.14368748682401027012592.jpg
 

Martaine2005

May 12, 2015
4,219
Joined
May 12, 2015
Messages
4,219
Hi,
That sure is a power supply. The pcb has the voltages on, so connecting it up shouldn't be a problem.
NOTE, top left, straighten Q4 to Q8 and make sure there is no shorts there.

Martin
 

Arouse1973

Adam
Dec 18, 2013
5,177
Joined
Dec 18, 2013
Messages
5,177
That's a bit of a beast..... +5 V @ 30 Amps.....nice. Hope it still works.
Adam
 

shrtrnd

Jan 15, 2010
3,826
Joined
Jan 15, 2010
Messages
3,826
The top line on the identification name plate has the model number.
Google it and see if you can get more information about it.
 
Top