Maker Pro
Maker Pro

Help in clean circuit

Fabulous87

Oct 20, 2022
2
Joined
Oct 20, 2022
Messages
2
Hi,
I need help in making the following circuit clean and look professional. Any US based company that can help in designing a PCB ? The resistance is 10k ohms.
It’s an open collector circuit consisting of a transistor, a resistor and bunch of wires to synchronize an X-ray source, detector and rotational stage. We are using an NI-DAQ card for synchronization.

I would appreciate any help where I can order something and plug in those wires into it. That way it looks clean and I can focus on the imaging part research.

Thank you

A newbie
 

Attachments

  • 8CCEC139-1D63-426F-B0B9-6E168CCEFF17.png
    8CCEC139-1D63-426F-B0B9-6E168CCEFF17.png
    965 KB · Views: 11
  • B138EDC1-04D7-4D1B-BADB-F65868A42460.png
    B138EDC1-04D7-4D1B-BADB-F65868A42460.png
    1.1 MB · Views: 11
  • 954F18EA-1B64-4D8B-84CC-01256D0612BF.png
    954F18EA-1B64-4D8B-84CC-01256D0612BF.png
    924.3 KB · Views: 11

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
I'd solder it up and shove some heatshrink over the whole deal.
Other than that there are quite a few online pcb makers that will make you ( possibly about 50 or more using panelize given the size) for less than $10 delivered.
China but if you want to be picky perhaps there are US based ones .
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
No need for a custom pcb here. Use perfboard, a bit of wire and solder.
Use heatshrink as suggested by @Bluejets for insulatio, if required.
 
Top