Maker Pro
Maker Pro

help me with this netlist

R

ranger

Jan 1, 1970
0
I trying to make the following circuit using SpiceOpus.
http://www.electronics-lab.com/projects/power/010/
Lets assume that I have the spice model for the LM317. Here is my
netlist (not using node labels on the website):

Power Supply
v1 4 5 dc 0 sin(0 34 60)



D1 4 2 1N4007
D2 0 5 1N4007
D3 5 2 1N4007
D4 0 4 1N4007

C1 2 0 2200u
*C2 in 0 100n
cout out 0 1u

radj adj 0 10
r1 out adj 240

x 2 adj out LM317/TI

..include parts.lib
..control
destroy all

dc radj 10 15000 1
plot v(out)

..endc
..end
-----------------------------------------------------------------
Well I want to plot the output as I vary the value of the
potentiometer (radj) from 10 ohm to 15k ohm. I'm using the dc radj 10
15000 1 to adjust the value of radj in steps of 1s to reach 15k. But I
dont get the right plots.

Did I make my netlist incorrectly?

thanks.
 
Top