Maker Pro
Maker Pro

help needed on harware implemetation projects !

R

ronald reiley

Jan 1, 1970
0
hi there ,
I am a student of under-graduate study in the field of
Electronics and Communication engineering . I want help on projects
with Hardware implemetation of concepts related to my field of study ,
but biomedical engineering and embedded sysytems preferable .

thanks a lot .... ( in advance ! )
yours and yours only ,
jrr
 
B

Ben Pope

Jan 1, 1970
0
ronald said:
hi there ,
I am a student of under-graduate study in the field of
Electronics and Communication engineering . I want help on projects
with Hardware implemetation of concepts related to my field of study ,
but biomedical engineering and embedded sysytems preferable .

You want help with the implementation? You do the design, they make it and
send it back to you?

Surely some strip board, a soldering iron and free evenings are your new
friends? It's the only way to learn the practical side of it, and you'll be
all the better designer for it.
yours and yours only ,

I bet you tell that to everyone... (oh, you did)

:p

Ben
 
C

CFoley1064

Jan 1, 1970
0
hi there ,
I am a student of under-graduate study in the field of
Electronics and Communication engineering . I want help on projects
with Hardware implemetation of concepts related to my field of study ,
but biomedical engineering and embedded sysytems preferable .

thanks a lot .... ( in advance ! )
yours and yours only ,
jrr

Semantically, I suppose this message is the Har-ware, and the project of
implementing the Har-ware is getting us to read it, and sharing in the mirth.
Consider your Har-ware project successfully implemented.

Good luck.
Chris
 
Top