Maker Pro
Maker Pro

help needed regarding atmel AT89C51 MCU.....

niks

Dec 6, 2009
2
Joined
Dec 6, 2009
Messages
2
hi!!
i m presently working on a project using atmel AT89C51 microcontroller.....
how can i dump my hex files in AT89C51.......
i've searched alot for its uploading software.....but i havn't found it yet....
so can anyone help me out in this........???
 

niks

Dec 6, 2009
2
Joined
Dec 6, 2009
Messages
2
thanx jamygdala!!
i've dowlodaed the jre based software named FLIP 3.3.4 from the mentioned site......
but dis software requires the BOOTLOADER software already loaded in d microcontroller.................so can u tell me wat dis BOOTLOADER actually is........and frm where i can get dis for free.........the micro cont i m using is AT89C51-24PI.......THANX AGAIN
 
Last edited:
Top