Maker Pro
Maker Pro

Help needed with old components

johnzar

Jan 4, 2017
6
Joined
Jan 4, 2017
Messages
6
Afternoon and thanks for the acceptance.
i am based in SA, and struggling to find components for an electronic circuit.
on the components it only says
J380 i think it must be 2SJ380 & K2931 2SK2391.....
anybody with some advise or help please?
JB
 

duke37

Jan 9, 2011
5,364
Joined
Jan 9, 2011
Messages
5,364
Show us the circuit. I Googled J380 and found that it is a P channel powerful fet. Have you looked up the others?

Why do you wish to find the components when you already have them?
 

johnzar

Jan 4, 2017
6
Joined
Jan 4, 2017
Messages
6
Thanks for the reply, one of my electronic sewing machines has a PC board in the unit that these two components on that are blown
 

duke37

Jan 9, 2011
5,364
Joined
Jan 9, 2011
Messages
5,364
The 2SK2931 is an n channel powerful fet.
There is a reason why these fets failed, presumably they drive the motor. There would be no point in putting in a couple more fets to fail. I would look at the motor if that is what they drive.

Why the secrecy?
 

johnzar

Jan 4, 2017
6
Joined
Jan 4, 2017
Messages
6
Sunstarr does not exist in SA anymore. i got the information from the supplier abroad. and yes they will not give me the schematic diagrams
 

johnzar

Jan 4, 2017
6
Joined
Jan 4, 2017
Messages
6
these two components does drive a presure foot system that has a 3 ohm coil operating the foot
 

johnzar

Jan 4, 2017
6
Joined
Jan 4, 2017
Messages
6
do i understood correct, these FET,s are not very strong? as like i said they only drive a 3 ohm coil
 

duke37

Jan 9, 2011
5,364
Joined
Jan 9, 2011
Messages
5,364
j380 P channel 100V 12A
2SK2931 N channel 60V 45A
What makes you think they have failed? They do not look to be mechanically damaged and have not been removed for testing.

With a 12V supply (guess) they will pass 4A through a 3Ω coil, well within their ratings.
 
Top