Maker Pro
Maker Pro

Help purchasing Capacitors

redliner

Apr 18, 2016
1
Joined
Apr 18, 2016
Messages
1
Sorry for such a newbie question but I don’t want to make an incorrect purchase. I am replacing the capacitors in two monitors. After searching through Digikey I found I had more than a few choices. The first monitor has radial can type capacitors 470µf 25v and 820µf 25v about 20mm in height. The second has radial can – SMD type 10µf 50v (?) about 6.5mm x 6.5mm surface diameter and about 6mm height and 100µf 25v(?) about 8mm x 8mm surface diameter and about 8mm height (I will have to pull them to get a more accurate measurement). I am looking for the best brand and quality, any help in getting the right capacitors would be greatly appreciated

Thanks in advance, Jay



10 50J.jpg 100 25T.jpg
 

chopnhack

Apr 28, 2014
1,573
Joined
Apr 28, 2014
Messages
1,573
Rubycon, Nichicon and Panasonic are all very good quality capacitors.
 
Top