Maker Pro
Maker Pro

help retrofiting a SAE C3A int amp

quilla333

Jun 27, 2012
1
Joined
Jun 27, 2012
Messages
1
i have a SAE C3A integrated amp that keeps burning the right channel output transistors. i have checked and replaced most of the faulty components in the circuit but still burns the output trans. right now the original or replacement transistor are obsolete and hard to find. and you can find them on e bay at 25.00$ a pop and that makes and expensive gamble to burn them again. i bought two DX amps on e bay rated at 100 watts. and i will like to retrofit the amp using the preamp from the SAE and use the DX amps for output keeping all the functions of the original amp. i do have the service manual and schematic. its this is possible. can somebody help me in this project? Thanks.
 
Top