Maker Pro
Maker Pro

Help: Solid State AC Relay with contact closure.

B

Blabber

Jan 1, 1970
0
Hoping that someone can offer some advice on this.

I have applications that that currently uses DC controlled Solid State
relays. I don't know the exact load but it's under 10A. A recurring
problem that I have is that I have only dry contacts available to trigger
the relay. I usually have to patch or jumper the required DC voltage and
lash it to the dry contacts in order to operate the SS Relay. Does anyone
know if there is a Solid State relay that operates on a contact closure to
ground rather than supply of DC Voltage? thanks for any advice.

PS: Hope this is the right group for this.
 
Top