Maker Pro
Maker Pro

Help with voltage step-down (I am very much a beginner)

bsavitch

Nov 25, 2020
4
Joined
Nov 25, 2020
Messages
4
Hello,

I'm attempting to make my son a lightsaber and need some help. I have an old cheap toy lightsaber powered by 3 AA batteries (1.5V each) in series. The toy has a board that controls a small LED and sound board when powered on.

I bought some LED strip lighting to use in the new saber- advertised as 12V, but I have it working with a 9V battery. Anyway, I would like to use the existing board to function with the new LED strip lighting, but don't really know how to do that. I have a bunch of various resistors that I took from some other small electronics. I'm honestly not sure where to start.

I would happily post pictures of what I have if that would help. I greatly appreciate any help or guidance.

Thanks,
Brian
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
Hi Brian, I think you will need to upload some very clear photos of the items you have.
So, you have two Sabers?
1 runs off 3x1.5v batteries =4.5v.
And 1 that runs from 12v?.
The LED strip is 12v.

Personally, you would be better off getting a LED strip that runs from USB, ie 5v to use with the older saber.

If I understand correctly, you can’t step down the voltage for the LED strip. It already has resistors along the strip length.
It may run from a 9v battery but current draw may render the battery useless after a short time.

Martin
 

bsavitch

Nov 25, 2020
4
Joined
Nov 25, 2020
Messages
4
Hi Brian, I think you will need to upload some very clear photos of the items you have.
So, you have two Sabers?
1 runs off 3x1.5v batteries =4.5v.
And 1 that runs from 12v?.
The LED strip is 12v.

Personally, you would be better off getting a LED strip that runs from USB, ie 5v to use with the older saber.

If I understand correctly, you can’t step down the voltage for the LED strip. It already has resistors along the strip length.
It may run from a 9v battery but current draw may render the battery useless after a short time.

Martin

Hi Martin - I think I didn't explain it very well.
I have one saber that I've taken apart. I'm making a new one. I took the electronics out of the old one. Basically, I want it to do everything it's already doing, except instead of powering the small light that it came with, I want it to power my new LED strip. So I think I need more voltage at the light, but then the voltage to power the soundboard/speaker needs to be stepped down. I have some resistors that I've removed from other electronics that I can use if they could help at all.

See pictures...
E8YXh1PkTi8hAhkm8
itSvjeEGMBX7Cgwz7
aUkEePEs553PmkSw7
SztP5s3vH6743irR7
 

bertus

Moderator
Nov 8, 2019
3,303
Joined
Nov 8, 2019
Messages
3,303
Hello,

The pictures don't show.
Shrink the pictures to about 300 kB and post them over here using the "Upload a File" button.

Bertus
 

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
As @bertus said, resize the images.
I think I now understand. But still think the 5v strip would have suited better to your application.

Martin
 

bsavitch

Nov 25, 2020
4
Joined
Nov 25, 2020
Messages
4
OK - Photos should be attached this time...
 

Attachments

  • LS1.jpg
    LS1.jpg
    141.3 KB · Views: 8
  • LS2.jpg
    LS2.jpg
    125 KB · Views: 7
  • LS3.jpg
    LS3.jpg
    167 KB · Views: 7
  • LS4.jpg
    LS4.jpg
    188.4 KB · Views: 7

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
Do you have the specifications of the LED strip?
What length will you use from the strip?

Martin
 

bsavitch

Nov 25, 2020
4
Joined
Nov 25, 2020
Messages
4
IP65, 12V Waterproof Flexible LED Strip Light(Power Cord not Included), 16.4ft/5m Cuttable LED Light Strips, 300 Units 3528 LEDs Lighting String.

They recommend a 12v 2amp power supply. I plan to use approximately 6 feet of the LED strip.

Is there any way to make this work? I'd really rather not get another LED strip.

Thanks,
Brian
 
Last edited by a moderator:

Martaine2005

May 12, 2015
4,932
Joined
May 12, 2015
Messages
4,932
The strip you have and the original module board are not going to work.
It might be possible with boost converter and or a mosfet/relay. But the 3 AA batteries won’t last five minutes.

Martin
 
Top