Maker Pro
Maker Pro

HELP!

cems

Jun 25, 2021
3
Joined
Jun 25, 2021
Messages
3
We designed a PCB with stm32f030c8t6. We soldered the PCB and tried to upload the code. Power has gone to the stm32f030c8t6 successfully but when we arranged a pin as a gpio output it wasn't high.
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Schematic?
Code?
Programming tool?
Was programming successful or did you get any error messages?
Power alone is an insufficient indicator. Does the clock generator work? Are all fuses burnt correctly?
 

cems

Jun 25, 2021
3
Joined
Jun 25, 2021
Messages
3
We didn't get any error messages for codes. We are using cubeid in c. Clock generator doesn't work. We couldn't upload the code
 
Top