Maker Pro
Maker Pro

Herky-Jerky Braun MultiQuick 7

kraml

Dec 16, 2021
2
Joined
Dec 16, 2021
Messages
2
My Braun Multiquick 7 has gone herky jerky. It has a very difficult time smoothly changing speeds. It will also change speed without warning. Bad. I need to open it without destroying it. Thx, M
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,700
Joined
Nov 17, 2011
Messages
13,700
Check this video. It is in German but you may be able to follow along the video only. At around 0:30 it is shown how to open the case. You may try the automatically translated subtitles if that helps.
 

kraml

Dec 16, 2021
2
Joined
Dec 16, 2021
Messages
2
Thanks Harald! I had watched that video previously, but did not realize that I could set youtube to translate it. I had assumed that maybe my brushes were going bad, but now that I've seen the translated version of the video, I'm going to start with that potentiometer under the cap. k
 
Top