Maker Pro
Maker Pro

Hewlett-Packard Mouse

A

Allan Adler

Jan 1, 1970
0
I have an old Hewlett-Packard mouse that doesn't work anymore and which
I've kept anyway until now, when I've finally found time and motivation
to open it up and study it. The label has markings such as
S/N 50C58606
P/N 5183-9012 REV A
M/N MO15K

Maybe S/N stands for serial number, but 50C58606 brought up no search hits.
Maybe P/N stands for part number; 5183-9012 does bring up a lot of hits
for Hewlett-Packard mice. The MO15K may refer to the wheel.

The components I'm mainly interested in identifying and hopefully getting
information about (e.g. spec sheets or application sheets) are the following:
(1) The rotary encoder at one end of the wheel shaft.
(2) The IC chip (probably a quadrature encoder) EICI127400
(3) The two opto-isolator pairs.

Neither (1) nor (3) has any markings I can find and my attempts to find
pictures online that resemble them has been largely unsucessful, except
for a Waitrony receiver that I found a data sheet for. The only hits
I got from searching for EICI127400 were archives of my own postings
about it.

Since the mouse itself can be identified, one would think it would be possible
to get information about its parts. I could, in principle, try to measure
the characteristics of each of these parts if I had suitable test equipment
and if I were not concerned about destroying the parts in the process. Maybe
if all else fails and I acquire several old Hewlett-Packard mice, I'll
consider doing that. But right now it is the only one I have and I don't
want to mess with it if I don't have to. Right now, I'm just trying to get
as much information about its parts as I can just by careful observation
with magnifying devices and web searches and requests for help from people
who might know something about these particular mice.

There is a schematic for the logitech mouse online, but so far I haven't
found anything comparable for the Hewlett-Packard mouse I'm looking at.
From the standpoint of Google searches, which mostly turn up mice for sale,
the mouse is itself a component. But I want to go deeper into it.
 
L

legg

Jan 1, 1970
0
I have an old Hewlett-Packard mouse that doesn't work anymore and which
I've kept anyway until now, when I've finally found time and motivation
to open it up and study it. The label has markings such as
S/N 50C58606
P/N 5183-9012 REV A
M/N MO15K

Maybe S/N stands for serial number, but 50C58606 brought up no search hits.
Maybe P/N stands for part number; 5183-9012 does bring up a lot of hits
for Hewlett-Packard mice. The MO15K may refer to the wheel.

The components I'm mainly interested in identifying and hopefully getting
information about (e.g. spec sheets or application sheets) are the following:
(1) The rotary encoder at one end of the wheel shaft.
(2) The IC chip (probably a quadrature encoder) EICI127400
(3) The two opto-isolator pairs.

Neither (1) nor (3) has any markings I can find and my attempts to find
pictures online that resemble them has been largely unsucessful, except
for a Waitrony receiver that I found a data sheet for. The only hits
I got from searching for EICI127400 were archives of my own postings
about it.

Since the mouse itself can be identified, one would think it would be possible
to get information about its parts. I could, in principle, try to measure
the characteristics of each of these parts if I had suitable test equipment
and if I were not concerned about destroying the parts in the process. Maybe
if all else fails and I acquire several old Hewlett-Packard mice, I'll
consider doing that. But right now it is the only one I have and I don't
want to mess with it if I don't have to. Right now, I'm just trying to get
as much information about its parts as I can just by careful observation
with magnifying devices and web searches and requests for help from people
who might know something about these particular mice.

There is a schematic for the logitech mouse online, but so far I haven't
found anything comparable for the Hewlett-Packard mouse I'm looking at.
From the standpoint of Google searches, which mostly turn up mice for sale,
the mouse is itself a component. But I want to go deeper into it.

Have you checked the cord and connector?

I doubt HP ever manufactured mice. M/N will be the manufacturing
source number, as assigned by HP.

I can't see that repairing this device will be profitable.

RL
 
M

Michael Black

Jan 1, 1970
0
legg said:
I can't see that repairing this device will be profitable.

RL

He's not repairing it.

He was trying to do some software
He got distracted into something else.
He needed an optocoupler for that.
Someone suggested those in mice, even though
they aren't the best choice, given the slot in the middle
He then got distracted by the other components in the mouse
So he wants to figure out what's in the mouse


Michael
 
L

legg

Jan 1, 1970
0
He's not repairing it.

He was trying to do some software
He got distracted into something else.
He needed an optocoupler for that.
Someone suggested those in mice, even though
they aren't the best choice, given the slot in the middle
He then got distracted by the other components in the mouse
So he wants to figure out what's in the mouse
Then he got distracted by newsnet.

Might I suggest vitamin B-complex supplements?

RL
 
Top