Maker Pro
Maker Pro

Hi all. I need some help sourcing some parts.

UglyBoy

Jan 22, 2023
1
Joined
Jan 22, 2023
Messages
1
Hi. A few years ago I started a project making ecig Pipes. I bought myself a wood lathe and made some prototypes which went down really well with folks. However, I fell on hard times and had to sell most of my stuff, including my wood lathe. I have now landed back on my feet and I have just bought myself a Jet wood lathe and I really want to get back into making these e cig pipes. Unfortunatly, I am stuck for places to find the electronic parts I need such as buttons, controllers and batteries. I have attached a few pics of the pipes I made way back when, and I would really love to find a good supplier of the electronics that go into making these things work. Initially I am looking for small on/off buttons, the type you push and hold to work. Also, the fitting that the ecig tank screws into, I think it is refered to as a 510 fitting. I hope the pictures give you some idea, and if you need any more info, I will do my best to provide it. please forgive me for not knowing technical speak, I am more of a heavy grunt than a tech head, but I am a fast learner.
 

Attachments

  • 99441089_135506248114942_7614046377999335424_n.jpg
    99441089_135506248114942_7614046377999335424_n.jpg
    251 KB · Views: 1
  • 100507885_135506301448270_2208252448781369344_n.jpg
    100507885_135506301448270_2208252448781369344_n.jpg
    293.9 KB · Views: 1
  • 100997081_135506074781626_61506693342691328_n.jpg
    100997081_135506074781626_61506693342691328_n.jpg
    152.1 KB · Views: 1
  • 101018150_135505914781642_7445995491801694208_n.jpg
    101018150_135505914781642_7445995491801694208_n.jpg
    52.3 KB · Views: 1
Top