Maker Pro
Maker Pro

Hi everyone My name is GODWIN and have been working on a simple light intensity control system using the attached circuit but both my res burns

ramussons

Jun 10, 2014
462
Joined
Jun 10, 2014
Messages
462
I think that location your Capacitor and Resistors (pot and 3.9K) in the schematic need to be interchanged.
 

Bluejets

Oct 5, 2014
6,901
Joined
Oct 5, 2014
Messages
6,901
Capacitor and Resistors (pot and 3.9K) in the schematic need to be interchanged.
They appear to be correct as is........although not certain what the neon is doing.

Op, show a photo of what you have in front of you.
Good clear with details........
 

crutschow

May 7, 2021
839
Joined
May 7, 2021
Messages
839
Post the schematic.
A wiring diagram is too difficult to follow.
 
Top