Maker Pro
Maker Pro

High speed ADC board (12-16Bits, 10MHz,1-2In,4-16K FIFO,USB-PCI PC104+, Linux support)

G

Guest

Jan 1, 1970
0
Can someone recomment an off the shelf product with the following specs;

Resolution : 12-16 bit
Conversion speed : 10Mega samples per second
Input Channel : 1-2
On board FIFO buffer : 4-16 K samples
Host Interface : USB or PCI interface to PC104+
SW support : Linux drivers (optionally Windows drivers)
 
A

Aidan Grey

Jan 1, 1970
0
Can someone recomment an off the shelf product with the following specs;

Resolution : 12-16 bit
Conversion speed : 10Mega samples per second
Input Channel : 1-2
On board FIFO buffer : 4-16 K samples
Host Interface : USB or PCI interface to PC104+
SW support : Linux drivers (optionally Windows drivers)

Two companies that offer such products are:

http://www.ni.com
http://www.gage-applied.com

Take a look through there product line to see if anything meets
your requirements.

Another source of ADC boards is:

http://www.dalanco.com

However, their boards are more expensive, and may have very
limited driver support.


Aidan Grey
 
Top