Maker Pro
Maker Pro

High Voltage cables

masudasim

Aug 25, 2012
6
Joined
Aug 25, 2012
Messages
6
Hello all

I need to select/source suitable shielded conductor/cable (of 200m lenght) for carrying 2 KVrms sinewave signal of 2 KHz frequency. The current will not exceede from 1.5 amp.

Moreover 2 to 4 conductor pairs will be placed side by side so shielding required for as less interfarence as possible.

Can any one kindly help me for selecting suitable cable/conductor?

Best Regards
asim
 

duke37

Jan 9, 2011
5,364
Joined
Jan 9, 2011
Messages
5,364
You could look at RF co-axial cable. Anything with a diameter of over 0.25 inch would seem to be able to withstand your voltage. RG8 is a common variety used by hams, this has a limit of 4kV. There are many others.
 
Top