Alvin Blanco Mioten
- Jun 26, 2014
- 1
- Joined
- Jun 26, 2014
- Messages
- 1
Good Day,
Once every year, I make something new. This year I have started designing a Home & Office Convection Reflow Oven, and while on the process of designing it, I realized that I had to make a control panel. The control panel would be using an ARM® Processor, and it would have to control a 3.5" Touchscreen 262K colors TFT display, 2 pieces of a Type K Thermistor, and a Through Hole Mount Relay (contact load of 110~220vac). All of these summed up also has to be cost efficient. Thanks in advance to whom may be responding to this thread. ( Note: If someone is able to help me design and program the circuit fully, I fully pledge to send a Home & Office Convection Reflow Oven for him/her no matter if it would be internationally shipped. )
Once every year, I make something new. This year I have started designing a Home & Office Convection Reflow Oven, and while on the process of designing it, I realized that I had to make a control panel. The control panel would be using an ARM® Processor, and it would have to control a 3.5" Touchscreen 262K colors TFT display, 2 pieces of a Type K Thermistor, and a Through Hole Mount Relay (contact load of 110~220vac). All of these summed up also has to be cost efficient. Thanks in advance to whom may be responding to this thread. ( Note: If someone is able to help me design and program the circuit fully, I fully pledge to send a Home & Office Convection Reflow Oven for him/her no matter if it would be internationally shipped. )
