Don said:
Your cables should be IMMEDIATELY replaced by four-point barbed wire!
See
http://www.tinaja.com/glib/marcia.pdf for detailed instructions.
Well, that's a start but you left out the most important steps: the
barb wire has to be soak in a fresh citric acid bath made from Florida
oranges. They have to be picked between 7:10 AM and 9:00 AM, and only
from the northern edge of the grove. The acid has to be extracted, then
heated to 142 degrees F by 10:15 at the latest. Then the wire has to
soak for exactly 27 seconds in a vat that holds 42 gals of acid, per
pound of treated wire. This micropickels the surface to remove the
surface slag, which chokes the low end. NEVER reuse the acid for a
second batch of wire.
--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.
Michael A. Terrell
Central Florida