Maker Pro
Maker Pro

Honeywell 6150 Keypad Troubleshooting

Neel1

Jun 8, 2016
1
Joined
Jun 8, 2016
Messages
1
Hi,
I moved to a new house which has Honeywell Vista 20P and 6150 keypad. I did not know the Installer code but was able to research online and was able to set my own code.

I initially had two errors - FC and 02. Now (after changing my installer code), I get an error 02 and 'Not Read'. How do I get rid of this error and start using the system? I don't know too much about how this is programmed but it seems like it's almost impossible to do zone programming. What are my options to start using the wired security system?

Thank you.
 
Top