Maker Pro
Maker Pro

Hot air gun plug standard

camerart

Aug 18, 2010
120
Joined
Aug 18, 2010
Messages
120
Hi,
Is there a standard pinout for hot airgun plugs?
Camerart
 

Martaine2005

May 12, 2015
4,360
Joined
May 12, 2015
Messages
4,360
Hot air gun? What type?
mains or 24V?
Paint stripper type or hot air solder re-work type

Martin
 

camerart

Aug 18, 2010
120
Joined
Aug 18, 2010
Messages
120
Hot air gun? What type?
mains or 24V?
Paint stripper type or hot air solder re-work type

Martin
Hi M,
Re-work type, as the fan is 24V it may be 24V, but I can check. The plugs are the aircraft type.
C
 

camerart

Aug 18, 2010
120
Joined
Aug 18, 2010
Messages
120

Attachments

  • Aircraft plug pinouts.png
    Aircraft plug pinouts.png
    111.8 KB · Views: 6

Martaine2005

May 12, 2015
4,360
Joined
May 12, 2015
Messages
4,360
If you give us more information on your unit, we may be able to help you further.
As you have seen, some have more connections than others.
But we're guessing as you have not supplied any info at all.

Martin
 

camerart

Aug 18, 2010
120
Joined
Aug 18, 2010
Messages
120
If you give us more information on your unit, we may be able to help you further.
As you have seen, some have more connections than others.
But we're guessing as you have not supplied any info at all.

Martin
Hi M,
It's called Mark Ethan rework staion, but I don't think it is a genuin one, as the ones, I search for aren't like it, so no real information.
It appears that I'm going to have to open up new guns and check they are the same as the socket, I'm going to fit.

I wonder why the ones I've seen don't have hot airgun sockets?
C
 

Martaine2005

May 12, 2015
4,360
Joined
May 12, 2015
Messages
4,360
I got a little lost and confused......
A soldering iron has the connector.
The heat gun has a tube. This hasn't got a connector.

Martin
 

camerart

Aug 18, 2010
120
Joined
Aug 18, 2010
Messages
120
I got a little lost and confused......
A soldering iron has the connector.
The heat gun has a tube. This hasn't got a connector.

Martin
Hi M,
Easy done.
The station has a wire but not socket (I'm about to fit one)

The new gun, has a plug, and has the heater in the handle.

Once I get it all fitted, I may be able to check a new heatgun, by resistances on the plug, without taking it apart.
Cheers, Thanks for your help, C.
 

Martaine2005

May 12, 2015
4,360
Joined
May 12, 2015
Messages
4,360
This one here on Amazon has the same amount of pins and a wide choice of units it fits.
Still confused though!.
Does your station have a connector? or are you adding a connector to it and a new heat gun?

Martin
 

bertus

Moderator
Nov 8, 2019
2,737
Joined
Nov 8, 2019
Messages
2,737
Hello,

Then there is here a teardown of the station:
It will explain the parts in the station.

Bertus
 
Top