Maker Pro
Maker Pro

How does a graphic display lcd work?

M

Mixboy

Jan 1, 1970
0
Hi,

I bought a graphic lcd (Powertip PG320240c) and I'm searching a document
that explains how the display works; in fact the lcd hasn't a controller and
I want to implent it with a DSP. Now the display has these inputs:
-FLM
-M
-CL1
-CL2
-D-OFF
-DB0-DB3

How can I control the lcd?

Thanks,

Mauro
 
B

Brendan Gillatt

Jan 1, 1970
0
Hi,

I bought a graphic lcd (Powertip PG320240c) and I'm searching a document
that explains how the display works

Aannndd the very first result that pops up when you enter 'PG320240c'
into google is... a datasheet
 
F

Franc Zabkar

Jan 1, 1970
0
Aannndd the very first result that pops up when you enter 'PG320240c'
into google is... a datasheet

.... which has pinouts and dimensions but little else.

- Franc Zabkar
 
P

PolyVinalDistillate

Jan 1, 1970
0
Aannndd the very first result that pops up when you enter 'PG320240c'
into google is... a datasheet

I can point you to where I explained this before in case you're still
having trouble. Don't know if there's a better way of directing you
there (Apologies for being a bit of a newb) but here's the link to
another discussion...
http://groups.google.nu/group/sci.e...q=polyvinaldistillate&rnum=1#a11ad9556bc7a15a

Otherwise, search for PolyVinalDistillate here - you'll find it :)
Good luck. Nick.
 
P

PolyVinalDistillate

Jan 1, 1970
0
Hi,

I bought a graphic lcd (Powertip PG320240c) and I'm searching a document
that explains how the display works; in fact the lcd hasn't a controller and
I want to implent it with a DSP. Now the display has these inputs:
-FLM
-M
-CL1
-CL2
-D-OFF
-DB0-DB3

How can I control the lcd?

Thanks,

Mauro

Hmm... I attempted to post this morning, but apparently I failed
miserably! I've posted before to explain the functions of the pins on
a GRX LCD panel (at least the functions I'm used to on my mono
panels!)

The link to that thread is here:
http://groups.google.com/group/sci....q=polyvinaldistillate&rnum=1#a11ad9556bc7a15a

You're looking at the 4th posting.

If you want me to help further, I'll check this out from time to
time :)
Nick.
 
Top