Maker Pro
Maker Pro

how it works, how to calculate the output

BobK

Jan 5, 2010
7,682
Joined
Jan 5, 2010
Messages
7,682
To calculate the output, read the marking on the part.

Bob
 

mursal

Dec 13, 2013
75
Joined
Dec 13, 2013
Messages
75
The output voltage for this regulator is 2.5Volts regardless of the input voltage (within limits), as long as you don't ask it to supply to much current. The maximum current rating for the device will be on the data sheet and is usually dependent on the package type it comes in.

Hope this helps ............
 

duke37

Jan 9, 2011
5,364
Joined
Jan 9, 2011
Messages
5,364
It says 2.5V !
The input voltage must be more than 3.5V and less than 15V.
 

sharimin

Dec 17, 2013
8
Joined
Dec 17, 2013
Messages
8
Tq Bob,, :)

if I change the capacitor, did it effect the output voltage
 
Top