Maker Pro
Maker Pro

how PWM IC UC2843 works?

Zippora

Aug 26, 2016
13
Joined
Aug 26, 2016
Messages
13
Can you explain me how the circuit works? It is DC driver circuit of LED Light?
 

Attachments

  • New Doc 9.pdf
    359 KB · Views: 96

Alec_t

Jul 7, 2015
3,587
Joined
Jul 7, 2015
Messages
3,587
Have a look at Fig 32 (page 13) of this version of the datasheet.
Also, read the Design Considerations on page 11.
 

Zippora

Aug 26, 2016
13
Joined
Aug 26, 2016
Messages
13
In attached DC driver circuit, I_Sense is applied to inverting terminal of OPAMP LM324 and then it is applied to pin no. 3 current sense of UC 2843. Is I_Sense input is integrated by opamp LM324 and then applied to UC2843?
 

Alec_t

Jul 7, 2015
3,587
Joined
Jul 7, 2015
Messages
3,587
Hard to say, since component values aren't specified.
Looks as though the Isense signal is being low-pass filtered.
 

Zippora

Aug 26, 2016
13
Joined
Aug 26, 2016
Messages
13
Please find attached file. R49 and R30 are used to change the driver configuration say 18W to 15W,etc. Will it help?
 

Attachments

  • New Doc 11.pdf
    642.7 KB · Views: 71

Alec_t

Jul 7, 2015
3,587
Joined
Jul 7, 2015
Messages
3,587
Changing R30/49 will change the opamp gain and hence the current feedback value that the regulator receives. This will change the regulator's output.
 

Manoj kundu

Mar 23, 2018
1
Joined
Mar 23, 2018
Messages
1
How pulse control logic and v ref good logic works in IC UC2843AQ with internal logic cct
 
Top