-
Categories
-
Platforms
-
Content
Thanks.
Thanks.Have a look at Fig 32 (page 13) of this version of the datasheet.
Also, read the Design Considerations on page 11.
Thanks.Hard to say, since component values aren't specified.
Looks as though the Isense signal is being low-pass filtered.
Thanks.Changing R30/49 will change the opamp gain and hence the current feedback value that the regulator receives. This will change the regulator's output.
Read the datasheet and any Application Notes you can find.How pulse control logic and v ref good logic works in IC UC2843AQ with internal logic cct