Maker Pro
Maker Pro

How to connect to a 4 terminal inductor?

Mothiol

Feb 1, 2024
1
Joined
Feb 1, 2024
Messages
1
Hello, I'm using this Inductor in a buck converter operation but I'm not sure which terminals I'm supposed to connect too?

Thanks
 

bertus

Moderator
Nov 8, 2019
3,259
Joined
Nov 8, 2019
Messages
3,259
Hello,

The datasheet also tells not much.
The datasheets are under the specs buttons on the page.
The datasheets of other coils show a different picture for connecting.
There seem to be two edges connected to the coli and two support pins.

Bertus
 
Top