Maker Pro
Maker Pro

How to connect ZVS driver to flyback transformer correctly

LimoCitron

Apr 15, 2021
4
Joined
Apr 15, 2021
Messages
4
Hey,
I ordered a ZVS driver + flyback transformer from Aliexpress and I'm trying to get it run.
I made a coil on the flyback transformer with 5 windings on each side. The center tap is connected to COM and the other ends of the coil are connected to the OUTs. The ZVS driver input is limited by my power supply to 10A, but the voltage dropped from 12V set to 0.5V running.
Can you help me?
 

Attachments

  • ZVS driver.jpeg
    ZVS driver.jpeg
    203.9 KB · Views: 9

Martaine2005

May 12, 2015
4,278
Joined
May 12, 2015
Messages
4,278
What do you mean?
Much more info required.
Asking for More information from you.

You have a zero volt switcher. What are the specs?.
You have a flyback transformer. Which one?. Specs?
You made a coil out of what? what gauge?.
You have a PSU, what type? what specs?
You connected it together. How?
You connected them with what? what gauge?

Just some general info you could have supplied.. Nothing too important..

Martin
 
Top