Maker Pro
Maker Pro

How to control Arduin using STONE HMI to implement a beauty instrument project

bancroft

Apr 23, 2021
81
Joined
Apr 23, 2021
Messages
81
Here we want to do a project on the use of medical devices and instruments, this project, the use of STONE STVA101WT-01 serial interface screen, when the key is pressed after the serial interface screen through the serial command to the Arduino Uno development board serial port command, when our MCU received a specific instruction began to parse the command, this parsing protocol is the STONE screen specific instruction set, and then the MCU will parse to identify a specific fan command and LED instructions , so as to achieve the control of fans and LEDs.
STONE HMI controls the arduino to achieve four functions implemented by the beauty instrument project:
(1) The serial interface screen realizes the touch button function;
(2) Send the touch command;
(3) The MCU converts the instruction set to hexadecimal;
(4) MCU control fan and LED light.
 

hevans1944

Hop - AC8NS
Jun 21, 2012
4,864
Joined
Jun 21, 2012
Messages
4,864
It appears that @bancroft is a shill for the STONE HMI color touchscreen, made in China, with no specific problem or question in mind.
 
Top