Maker Pro
Maker Pro

How to control the HV converter with analog voltage signal

Dykan

Aug 17, 2023
2
Joined
Aug 17, 2023
Messages
2
The HV converter require 24V power supply and some analog voltage signals. I connect two 0~10V voltage signals to the pin of HV converter, 10HVA24-N1. However what I get from the output of HVA is 0V. Is there any thing wrong with my wiring?
1692258897391.png1692258939587.png
1692259152477.png
 
Last edited:

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,337
Joined
Nov 17, 2011
Messages
13,337
Obviously 8-9. The vertical line from pin 8 to + is hard to see (aliasing).
 

Harald Kapp

Moderator
Moderator
Nov 17, 2011
13,337
Joined
Nov 17, 2011
Messages
13,337
Pin 1 at + 10 V?
The table states "TTL High". TTL is max. 5 V.
 
Top