Maker Pro
Maker Pro

how to disable the flashing LED

3212333

Oct 1, 2012
3
Joined
Oct 1, 2012
Messages
3
just wondering is it possiable to make the LED not flashing? and How?
 

Attachments

  • IMAG0322.jpg
    IMAG0322.jpg
    153.2 KB · Views: 160
  • IMAG0323.jpg
    IMAG0323.jpg
    154.2 KB · Views: 170
  • IMAG0322b.jpg
    IMAG0322b.jpg
    157.1 KB · Views: 178
Last edited:

davenn

Moderator
Sep 5, 2009
14,039
Joined
Sep 5, 2009
Messages
14,039
hi welcome to the forums :)

do you just want them on steady all the time ?
Under that black blob on that small vertical cct board will be an IC that will control the flashing

Dave
 

Rleo6965

Jan 22, 2012
585
Joined
Jan 22, 2012
Messages
585
Please give us the name or part number of that small black transistor near small board. We need that info so we can determine the base, collector and emitter of transistor.
 

(*steve*)

¡sǝpodᴉʇuɐ ǝɥʇ ɹɐǝɥd
Moderator
Jan 21, 2010
25,505
Joined
Jan 21, 2010
Messages
25,505
Unsolder the end of the 1k resistor where I have circled and connect it to one of the three points I have indicated. My first choice would be the 1k resistor directly to the right of it.

attachment.php
 

Attachments

  • IMAG0322b.jpg
    IMAG0322b.jpg
    152.4 KB · Views: 273

3212333

Oct 1, 2012
3
Joined
Oct 1, 2012
Messages
3
i did follow every setp. the LED stop flashing. which is good. but the left side top 3 LED not working. i will post picture later. thx
 

Attachments

  • IMAG0326.jpg
    IMAG0326.jpg
    110 KB · Views: 146
Last edited:
Top