Maker Pro
Maker Pro

How to disconnect ribbon cable

tj405

Mar 13, 2021
1
Joined
Mar 13, 2021
Messages
1
I'm trying to remove 2 ribbon cables from a sony dat deck. I have posted a pic of the type of connector. I looked for a flap to fold back, but didn't see one.

Thanks in advancesonyDAT Connector.jpg
 

Technomaniac

Oct 31, 2020
100
Joined
Oct 31, 2020
Messages
100
Can you show an end view of the black block? There appear to be contacts, and the conductive tracks showing through the ribbon appear to have width, so it DOES look like a connector. It probably pulls straight out, make sure you mark the ribbon and board so it goes back in the right way round...
 
Top