Maker Pro
Maker Pro

How to Program the PIC16f57

jwflammer

May 4, 2010
1
Joined
May 4, 2010
Messages
1
I have a Sure Electronics Demo board for dot-matrix LED 6416&6432 and it has a PIC16f57 i want to reprogram it to change the displayed information to have it say what i want it to the board has 6 pins to work with NC, PGC, PGD, GND, +5V, and MCLR how do i use these pins to program the chip i'm thinking i should use hyper terminal for Linux to program it and build a make shift com1 cable connector but im lost can any one point me in the right direction.


thanks John
 
Top